HP Data Center EnvIronmental Edge manual 10

6.In the navigation menu on left side of the page, select Network. The Network Configuration page appears.

NOTE: The Ethernet link settings of speed and duplex must match the settings of the switch and servers NIC. If the speeds or duplex do not match, then the gateway cannot communicate with the Edge server.

7.Populate the following fields, using the same information you entered in the HP Insight Environmental Configurator:

o IP address (Example: 10.100.100.30)

o Network mask (Example: 255.255.254.0)

o Gateway (Example: 10.100.100.1)

8.Select Submit.

9.Verify the default settings on the following pages:

HP Base Station Gateway 10