13Disconnect the cables from the drive:
The plugs on the cables are keyed and can be inserted only when aligned properly with the connector on the drive.
In addition, some plugs have a latch that must be pressed or squeezed to release the plug while pulling it from the connector.
Plugs without a latch:
For plugs without a latch, pull the plug straight out from the connector.
Plugs with a latch:
For plugs with a latch, press the latch (1 or 3) in the center of each plug, and then pull the plug (2 or 4) from the connector.
1 3
4
2
14Pull the drive completely out through the front of the computer.
5 |