Table 9.11 Error Messages (4 of 11)
Error Code and | Description |
Message |
|
|
|
1B PRINTER NUMBER | The NetWare printer number assigned to the printer is |
IN USE | already in use by another printer. Assign an unused printer |
| number. This may also occur when a printer is powered |
| off/on, in which case the error goes away after the print |
| server times out and detects the lost connection. |
|
|
1C PRINT SERVER | The file server does not have a print server object that |
NOT DEFINED | corresponds to the specified NetWare node name. Use |
| printer installation software, a NetWare utility (such as |
| PCONSOLE), or other tool to create the print server object. |
| When the HP Jetdirect print server is configured for multiple |
| file servers, the error is only displayed on the configuration |
| page if none of the file servers made the connection. |
|
|
1D UNABLE TO | Remote Printer mode error: The HP Jetdirect print server |
CONNECT TO | was unable to establish an SPX connection with the |
SERVER | NetWare print server. Make sure that the NetWare print |
| server is running and that all cables and routers are |
| functioning correctly. |
|
|
1E FAIL RESERVING | The SPX connection to the print server was lost when the |
PRINTER NUM | HP Jetdirect print server attempted to reserve the printer |
| number. This indicates a possible network problem, or a |
| problem with the print server. Make sure all cables and |
| routers are functioning correctly. Try restarting the print |
| server. |
|
|
1F ERR NEGOTIATING | A failure was detected when selecting the buffer size to be |
BUFFER SIZE | used when reading print data from the file server. This may |
| indicate a network problem. |
| When the HP Jetdirect print server is configured for multiple |
| file servers, the error is only displayed on the configuration |
| page if none of the file servers was successfully connected. |
|
|
20 UNABLE TO LOGIN | A failure was detected when the HP Jetdirect print server |
| tried to log onto the file server. This could be caused by the |
| print server object not existing on the file server, or by a |
| security check that prevents the print server from logging in. |
| Make sure the file server name and print server object name |
| are correct. Use PCONSOLE to erase the password for the |
| print server object. Create a new print server object. |
| When the HP Jetdirect print server is configured for multiple |
| file servers, the error is only displayed on the configuration |
| page if none of the file servers made the connection. |
|
|
ENWW | HP Jetdirect Configuration Page 228 |