Table 9.11 Error Messages (5 of 11)
Error Code and | Description |
Message |
|
|
|
21 UNABLE TO SET | A failure was detected when the HP Jetdirect print server |
PASSWORD | tried to set the password for the print server object. |
| (Whenever the HP Jetdirect print server is able to log in |
| without a password, it sets the password automatically.) This |
| indicates a networking or security problem. Create a new |
| print server object. |
| When multiple file servers are configured, the error is only |
| displayed on the configuration page if none of the file servers |
| were successfully connected. |
|
|
22 UNABLE TO | Queue Server mode error: The HP Jetdirect print server |
CONNECT TO | could not establish an NCP connection to the file server. |
SERVER | Make sure that the correct file servers are connected. |
| When multiple file servers are configured, the error is only |
| displayed on the configuration page if none of the file servers |
| were successfully connected. |
|
|
23 UNABLE TO | A failure was detected when the HP Jetdirect print server |
ATTACH TO QUEUE | tried to attach to one of the queues assigned to the print |
| server object. This may be because no servers are allowed |
| to attach to this queue. There may also be a networking or |
| security problem. Use PCONSOLE to make sure that |
| servers are allowed to attach to the queue, to delete the print |
| server object from the list of queue servers if you want the |
| HP Jetdirect print server to service other queues, or to |
| delete the queue and create a new one (the print server |
| object must be added to the list of queue servers). |
| When the HP Jetdirect print server is configured for multiple |
| file servers, the error is only displayed on the configuration |
| page if none of the file servers made the connection. |
|
|
24 PSERVER CLOSED | The NetWare print server requested a termination of the |
CONNECTION | connection with the HP Jetdirect print server. No error exists |
| or is indicated. Make sure the NetWare print server is |
| running, and restart it if necessary. |
|
|
25 DISCONNECTING - | The SPX connection to the print server was lost after the |
SPX TIMEOUT | connection had been made. This indicates a possible |
| network problem, or a problem with the print server. Make |
| sure all cables and routers are functioning correctly. Try |
| restarting the print server. |
|
|
26 UNKNOWN NCP | The HP Jetdirect print server encountered an unexpected |
RETURN CODE | fatal error after it had successfully connected to the file |
| server. A wide variety of failures could produce this error |
| message, including a downed file server or a network |
| router failure. |
|
|
ENWW | HP Jetdirect Configuration Page 229 |