Table 9.11 Error Messages (11 of 11)
Error Code and | Description |
Message |
|
|
|
86 FOR | When upgrading a supported print server that contains a |
MULTILANGUAGES | firmware version prior to X.24.00, it will be necessary to |
UPGRADE AGAIN | perform the firmware upgrade again if you want the print |
| server to support management tools (for example, the |
| embedded Web server) using |
|
|
F1 TRYING TO | The HP Jetdirect print server is trying to connect to the |
CONNECT TO | NetWare server(s). This is a normal message. Wait until |
SERVER | either the connection is established or another status |
| message appears. |
|
|
F2 TFTP IN | The print server is attempting to use TFTP to obtain TCP/IP |
PROGRESS | configuration settings over the network. |
|
|
F3 BOOTP/RARP IN | The print server is attempting to use BootP or RARP to |
PROGRESS | obtain TCP/IP configuration settings over the network. |
|
|
F4 BOOTP/DHCP IN | The print server is attempting to use BootP or DHCP to |
PROGRESS | obtain TCP/IP configuration settings over the network. |
|
|
ENWW | HP Jetdirect Configuration Page 235 |