Graphical Control Panel
Graphical control panels typically display 18 characters on a line, and as many as four lines at a time. In addition, scrolling may be supported to allow display of additional lines.
MENUS
+XXXXXXXXXX
+XXXXXXXXXXXX
+XXXXXXXX
?
On graphical control panels, a numeric keypad and navigation buttons are used to access HP Jetdirect menu items. For a description of menu items and options, see Table B.2.
Table B.2 HP Jetdirect Graphical Control Panel Menu (1 of 4)
Menu Item | Options | Description of settings |
|
|
|
TCP/IP | ENABLE | ON: Enable the TCP/IP protocol |
|
| OFF: Disable the TCP/IP protocol |
|
|
|
| HOST NAME | An alphanumeric string, up to 32 characters, |
|
| used to identify the device. This name is listed |
|
| on the Jetdirect configuration page. The |
|
| default host name is NPIxxxxxx, where |
|
| xxxxxx is the last six digits of the LAN |
|
| hardware (MAC) address. |
|
|
|
| CONFIG METHOD | Specifies the method that TCP/IP parameters |
|
| will be configured on the Jetdirect print server. |
|
| ● BOOTP: Use BootP (Bootstrap Protocol) |
|
| for automatic configuration from a BootP |
|
| server. |
|
| ● DHCP: Use DHCP (Dynamic Host |
|
| Configuration Protocol) for automatic |
|
| configuration from a DHCP server. If |
|
| selected and a DHCP lease exists, DHCP |
|
| RELEASE and DHCP RENEW menus will |
|
| be available to set DHCP lease options. |
|
| ● AUTO IP: Use automatic |
|
| addressing. An address in the form |
|
| 169.254.x.x will be automatically |
|
| assigned. |
|
| ● MANUAL: Use the MANUAL SETTINGS |
|
| menu to configure TCP/IP parameters. |
|
|
|
ENWW | The HP Jetdirect EIO Control Panel Menu 249 |