4.Select Connect to a printer on the Internet and enter the print server’s URL:

http://IP_address[/ipp/port#]

where IP_address is the IP address configured on the HP Jetdirect print server. [/ipp/port#] identifies the port number, which is port 1 for single-port 620n and en3700 print servers (default is /ipp/port1).

Example:

http://192.160.45.40

An IPP connection to HP Jetdirect

 

620n/en3700 print server with IP

 

address 192.160.45.40. (“/ipp/port1” is

 

assumed and not required.)

 

 

Then click Next.

5.You will be prompted for a printer driver (the HP Jetdirect print server does not contain printer drivers, so your system cannot automatically obtain the driver). Click OK to install the printer driver onto your system and follow the instructions on the screen. (You may need your printer CD-ROM to install the driver.)

6.To complete the print path setup, follow the instructions on the screen.

Windows Me IPP Client

The IPP implementation on the HP Jetdirect print server is compatible with Windows Me IPP-client software. The IPP client is installed from the Add-Onsfolder on the Windows Me CD-ROM. For installation and setup of a Windows Me IPP client, see the instructions provided with the Windows Me CD-ROM.

Novell Supplied Software

The HP Jetdirect print server is compatible with IPP running on NetWare 5.1 with SP1 or later. For NetWare client support, refer to your NetWare technical documentation or contact Novell.

ENWW

HP Software Solutions Summary 25