HP HSR6800 Router Fiber transceiver modules, NOTE:, Connector type, Transceiver module type, The available transceiver modules vary by HP

Transceiver module type			Connector type
		100-Megabit bi-direction (BIDI) fiber
		transceiver module	LC
		Gigabit BIDI fiber transceiver module
		Gigabit coarse wavelength division
		multiplexing (CWDM) fiber transceiver	LC
		module
		Gigabit SFP copper transceiver module	RJ-45
		Gigabit SFP cable (for interconnecting	N/A
		devices)
		10-Gigabit SFP+ fiber transceiver module	LC
SFP+ module (transceiver)
		10-Gigabit SFP+ cable (for interconnecting	N/A
		devices)
10-Gigabit small form-factor pluggable (XFP) module (transceiver)			LC
10-Gigabit CX4 cable (for interconnecting devices)			N/A
	40-Gigabit QSFP+ fiber transceiver module		MPO/LC
QSFP+ module	40-Gigabit QSFP+ cable (for interconnecting QSFP+		N/A
	ports)
(transceiver)
	QSFP+ to SFP+ cable (for connecting one 40-Gigabit		N/A
	QSFP+ port to four 10-Gigabit SFP+ ports)
CFP module	40-Gigabit/100-Gigabit CFP fiber transceiver module		LC
(transceiver)
CXP module	100-Gigabit CXP fiber transceiver module		MPO
(transceiver)	100-Gigabit CXP AOC		N/A

NOTE:

•The available transceiver modules vary by HP Comware-Based device models and are subject to change over time. For the most up-to-date list of transceiver modules, contact your HP sales representative or technical support engineer.

•For information about the transceiver modules available for each HP Comware-Based device model, see the installation guides.

Fiber transceiver modules

Fiber modules transmit signals over optical fibers. Optical transmission features low loss and is fit for long distance transmission.

The HP Comware-Based devices support fiber transceiver module models of different specifications. You can choose fiber transceiver modules as needed for data transmission over optical fibers.

The fiber transceiver modules include optical transmitters, optical receivers, transceivers, and transponders.

The HP Comware-Based devices support transceivers. Transceivers are mainly used for optical-to-electrical and electrical-to-optical conversions and provide the following functions: optical

3