QUALSTAR
iSCSI Option
The iSCSI Option offers network connectivity for any Qualstar RLS or
and NAS environments.
KEY FEATURES•1U, standard width rackmount enclosure•Compatible with all Qualstar TLS and RLS- Series tape libraries and drive technologies
•Gigabit
•Advanced
•Quad gigabit Ethernet data ports with R J45 connectors
•Dual Ultra320 LVD/ SE SCSI busses with VHDCI•Support for Microsoft iSCSI initiators
•Support for iSCSI protocol standards
•Support for NDMP ver 4.0, 3.0 protocol standards
•Configuration, management and monitoring via RS232 or independent Ethernet ports
QUALSTAR CORPORATION
3990-B Heritage Oak Court
Simi Valley, CA 93063
NASDAQ: QBAK
•Four independent 100 / 1000 GbE R J45 Ethernet data ports
•Supports Microsoft iSCSI initiators
•Supports IP v.4
•Support for NDMP version 4.0, 3.0
•Compliance with IEEE 802.3 GbE
•Compliance with IEEE 802.3 flow control•SNMP MIB 2.2 support
SCSI INTERFACE•Two independent 320 MB /second Ultra320 LVD/ SE SCSI bus ports•SCSI block level data encapsulation in iSCSI transport
•Initiator and target mode support
•Backward compatible with all single-ended SCSI tape drives
OPERATING ENVIRONMENT•Operating system independent
•Management support via Ethernet for Windows environmentsFax: 805-583-7749
Tel: 805-583-7744 800-468-0680
E-mail: sales@qualstar.com
Website: www.qualstar.com
•Integrated web server for remote configuration, management and diagnostic capabilities
•Local diagnostics supported through CLI, SNMP, Telnet, FTP and SCSI Enclosure Services (SES)
•Command line and•Support for RS-232 access via RJ-11 interface
•MultiTarget Mode allows each SCSI device to have its own iSCSI Target name•Multiple levels of password protection
ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS CONFIGURATIONS•Desktop enclosure with rackmount kit
•1.7" (1U) H x 17" W x 8.94" D
•Weight: 8 lbs
•Power: 90 – 132 VAC or 175 – 264 VAC 50 – 60 Hz, Max .75 A @ 110 VACQualstar Corporation does not warrant the MEBF to be representative of any particular unit installed for customer use. Failure rates are derived from a large database of test samples. The individual failure rate will vary from unit to unit.
All information and specifications are based on our knowledge of the products at the time of printing. Qualstar reserves the right to change specifications without notice.
Copyright © 2008 Qualstar Corporation.All rights reserved. Printed in USA.DS 280 3/08