The TFTP configuration file points to a parameter file called “pjlprotection”. This file is sent to the printer on power-up. Here is a sample content for the pjlprotection file:

<ESC>%-12345X@PJL <CR><LF>

@PJL COMMENT **Set Password** <CR><LF>

@PJL COMMENT **& Lock Control Panel**<CR><LF> @PJL JOB PASSWORD = 7654 <CR><LF>

@PJL DEFAULT PASSWORD = 1776 <CR><LF>

@PJL DINQUIRE PASSWORD <CR><LF>

@PJL DEFAULT CPLOCK = ON <CR><LF> @PJL DINQUIRE CPLOCK <CR><LF> @PJL EOJ <CR><LF> <ESC>%-12345X

Recommended Security Deployments: SET 2

For the HP Jetdirect products that are in SET 2, the security wizard is recommended for non HP Web Jetadmin users. The security wizard can be access via the Networking tab, “Settings” in the left-hand navigation bar, and then the “Wizard” tab. A sample configuration is shown here:

NOTE: be sure to use HTTPS when navigating to this page. Press the “Start Wizard” button to begin the wizard.

The Security level you want to implement on Jetdirect. Here, we are going to choose “Custom Security” to show all the options that are available to a customer.

12