Recommended Security Deployments: SET 4
First and foremost, SET 4 configuration needs to have the Security Wizard for SET 2 executed. Once the Security Wizard configuration has been completed, then we can begin the IPsec configuration. Let’s go through the same process as we did with SET 3, only this time, we’ll simply say that all IP addresses must use IPsec to utilize a management protocol. If an end station tries to communicate with a management protocol to Jetdirect without using IPsec, the packets are dropped by the IP layer.
Be sure that you are using HTTPS before navigating to this page. Select “Allow” for the default rule and then click “Add Rules…”.
Select “All IP Addresses” and click “Next”.
28