Running the HP JetAdmin Software

The HP JetAdmin software helps the administrator to configure the print server and the spooling system. To run the HP JetAdmin software from the default paths, type the following. If you installed HP JetAdmin in a different directory, the paths might be different.

For HP-UX 10.01 - 10.20, 11.x, and Solaris 2.5.x - 2.6, type:

/opt/hpnp/bin/jetadmin

To use HP JetAdmin software in a UNIX-based TCP/IP environment, you must first configure the HP JetDirect print server and configure the host spooler.

Configuring the HP JetDirect Print Server

For information on configuring the HP JetDirect print server with TCP/IP network parameters, refer to the HP JetDirect Administrator’s Guide.

Configuring the Host Spooler

Similar to other serial or parallel connected printers, a network printer (represented by its IP address) must be configured to the local spooler before you can access it.

66 UNIX (HP-UX and Solaris) Networks

EN