9.Type the name of the port and click Next. The name must not be the name of an existing port, such as LPT1, or an existing DOS device.
10.If a password is not currently specified, click the New Password box and type a password of up to 12 characters. The password can be any combination of characters on your keyboard.
11.If you are changing the current password, click the
Current Password box and type the current password, then click the New Password box and type a new password of up to 12 characters. The password can be any combination of characters on your keyboard.
Note | After you enable a configuration password, you will |
| be asked to type the password when you attempt to |
| configure devices in the future. If you do not type |
| the correct password, access will be denied. Once |
| the correct password is typed, you will not be asked |
| for the password again from that workstation. |
|
|
12.Click Finish.
13.To share the printer with other users on the network, click the Share This Printer on the Network box.
14.Click OK to create the printer.
15.Click OK on the Printer Setup screen.
The printer you have just set up can be accessed from the local computer at this time. If you shared the printer, the printer can also be accessed from client computers.
56 Microsoft Windows NT/2000 Networks (TCP/IP or IPX/SPX)
EN