5 Substrate settings
Download media presets
Each supported substrate has its own characteristics. The printer changes the way it prints on each different substrate. The RIP requires a description of the requirements of each substrate. This description is called the “media preset”.
The media preset contains the ICC color profile, which describes the color characteristics of the substrate. It also contains information about other characteristics (RIP and printer settings) and requirements of the substrate that are not directly related to color. Media presets for your printer are installed in the RIP.
The RIP contains media presets for only the most commonly used substrates. If you buy a substrate for which your RIP has no preset, you can obtain a preset for a new substrate in the following ways:
●Try to download the media preset from the substrate manufacturer's Web site.
●If it is not there, try to download it from the RIP company's Web site.
●If it is not there, check availability using the HP Media Finder search application located at http://www.hp.com/go/latexmediafinder/
●If you cannot find it anywhere, create a new media preset in the RIP. See Add a new substrate on page 41.
●Further information can be found at http://www.hp.com/go/L26500/solutions/.
Add a new substrate
This section is provided in case you decide to make your own media preset. Normally there is no need to do this if you can find
ENWW | Download media presets 41 |