settings Substrate
Change settings while printing
You can use the front panel to change the following settings while printing.
●To change temperature and vacuum settings while printing: select the 
icon, then Image quality maintenance > Adjust printing params, and choose the setting that you want to adjust. You can use the arrow keys to adjust the curing temperature, the drying temperature or the vacuum pressure. The changes that you make take effect immediately, but they are not saved: the next job will use the settings in the media profile as usual.
●To change substrate advance calibration while printing (in case of banding): select the 
icon, then Image quality maintenance > Substrate advance calib > Adjust substrate advance. You can use the arrow keys to adjust the substrate advance. The changes that you make take effect immediately, but they are not saved for the next job. See also Substrate advance adjustment on the fly on page 58.
●To enable or disable extra printhead cleaning while printing: select the 
icon, then Image quality maintenance > Enable extra PH cleaning or Disable extra PH cleaning. In this case, the change of setting is saved for subsequent jobs.
NOTE: Extra printhead cleaning shortens the life of the printhead cleaning cartridge.
Advanced settings
Here are some more advanced settings, which you are not recommended to change, unless you have problems that you cannot resolve any other way.
The drying and curing temperatures used by the printer are determined by adding the offset to the base temperature. The base temperatures shown in the table are the default values for each substrate family, but may be changed by the printer depending on the printer settings in use. You cannot change the base temperatures yourself, but you can change the offsets. The base
Your RIP may have an option to return all settings to their default values.
Substrate | Cool- | Cool- | Cool- | Cool- | Minimum | |||
family | drying | curing | curing | down | down | down | down | drying |
| temperat | temperat | temperat | drying | drying | curing | curing | power |
| ure offset | ure | ure offset | temperat | temperat | temperat | temperat |
|
|
|
|
| ure | ure offset | ure | ure offset |
|
|
|
|
|
|
|
|
|
|
Self- | 10 | 95 | 0 | 80 | 0 | 95 | 0 | 0.7 |
adhesive |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Banner | 10 | 95 | 0 | 80 | 0 | 90 | 0 | 0.7 |
|
|
|
|
|
|
|
|
|
Textile | 5 | 85 | 0 | 80 | 0 | 90 | 0 | 0.7 |
|
|
|
|
|
|
|
|
|
Film | 5 | 85 | 0 | 80 | 0 | 100 | 0 | 0.7 |
|
|
|
|
|
|
|
|
|
Synthetic | 5 | 80 | 0 | 75 | 0 | 85 | 0 | 0 |
paper |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Paper- | 5 | 60 | 0 | 75 | 0 | 85 | 0 | 0 |
aqueous |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Paper- | 10 | 75 | 0 | 75 | 0 | 90 | 0 | 0.7 |
solvent |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
46 Chapter 5 Substrate settings | ENWW |