Error Messages and Codes
Table
Error Message | Probable Cause |
|
|
Current parallel port address is conflicting with another device. | |
|
|
NIC BIOS could not read Device ID of embedded NIC. | |
|
|
Graphics display controller. | |
|
|
Corrupted splash screen image. Restore default image w/flash utility. | |
|
|
Processor heat sink fan is not connected. | |
|
|
Rear chassis fan is not connected. | |
|
|
Front chassis fan is not connected. | |
|
|
CPU fan is not connected or may have malfunctioned. | |
|
|
Power supply fan not deteted | |
|
|
Diskette drive removed since previous boot. | |
|
|
Mismatch in drive type. | |
|
|
Cover (hood) removal has been detected by the Smart Cover Sensor. | |
Since Last System Start Up |
|
Smart Cover Lock mechanism is missing or not connected.
Power button harness has been detached or unseated from the system | |
| board. |
|
|
Front audio board not connected | |
|
|
Front USB board not conencted | |
|
|
Riser card has been removed or has not been reinstalled properly in | |
MultiBay Risers Not Detected | the system. |
|
|
Cable from serial port header to I/O connector is missing or not | |
Detected | connected properly. |
|
|
Cable from front panel USB and audio connectors is missing or not | |
| connected properly. |
|
|
SMART circuitry on an IDE drive has detected possible equipment | |
Imminent Failure | failure. |
|
|
SMART circuitry on a SCSI drive has detected possible equipment | |
Detects Imminent Failure | failure. |
|
|
BIOS flashing did not complete | |
|
|
Technical Reference Guide | www.hp.com |