Using the Projector
Powering On the Projector
1.Make sure the power cord and signal cable are securely connected.
✎Make sure the projector is perpendicular to the projection screen.
2.Remove the lens cap 1 from the projector by pressing in on the tabs on either side of the lens cap and pulling it straight out.
3.Press the main power switch 2 on the side of the projector and allow the projector to warm up for one to two minutes.
When the projector has warmed up, the Compaq startup screen displays and the LED on the Standby button 3 turns green.
Compaq iPAQ Microportable Projector MP4800 User’s Guide |