HP MSM3XX About this guide, Products covered, HP ProCurve Product Naming

Introduction

About this guide

Note

About this guide

This guide explains how to work with the Command Line Interface (CLI) on HP ProCurve Networking MSM3xx and MSM4xx APs.

Products covered

This guide covers the following products:

	Part number
	USA	Worldwide
Model	version	version
MSM310 Access Point	J9374A	J9379A
MSM310-R Access Point	J9380A	J9383A
MSM320 Access Point	J9360A	J9364A
MSM320-R Access Point	J9365A	J9368A
MSM325 Access Point with Sensor	J9369A	J9373A
MSM335 Access Point with Sensor	J9356A	J9357A
MSM410 Access Point	J9426A	J9427A
MSM422 Access Point	J9358A	J9359A

HP ProCurve Product Naming

As of October 1st, 2008, Colubris Networks was acquired by HP ProCurve. HP ProCurve has begun integrating the Colubris product line into the HP ProCurve Networking product portfolio (www.procurve.com/news/colubris-10-01-08.htm).

In the online help and this manual, Colubris product names have been changed to their equivalent HP ProCurve product names.

SOAP and SNMP MIBs retain the Colubris naming so you do not need to change your existing SOAP and MIB usage.

The Colubris Networks product names and their corresponding new HP ProCurve product names are as follows:

Colubris name	HP ProCurve name
MSC-5100 MultiService Controller	MSM710 Controller
MSC-5200 MultiService Controller	MSM730 Controller
MSC-5500 MultiService Controller	MSM750 Controller

1-2