CLI commands

mac-filters

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

mac-filters <address>

Adds an address to the MAC filter list.

no mac-filters <address>

Remove the specified address from the MAC filter list.

Parameters

<address>

MAC address. Specify 6 pairs of hexadecimal numbers separated by

 

colons, with the values a to f in lowercase. For example: 00:00:00:0a:0f:01

Description

This feature enables you to control access to the AP based on the MAC address of client stations. You can either block access or allow access, depending on your requirements. When both this option and the MAC-based authentication options are enabled, the following applies: if a user MAC address does not appear in the MAC filtering list, then MAC-based authentication takes place for that user.

mac-filters mode

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

mac-filters mode (allow block)

Either allow or block access to the wireless network for client stations whose addresses appear in the MAC filter list.

mac authentication accounting

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

mac authentication accounting

Enables RADIUS accounting for this VAP (VSC).

no mac authentication accounting

Disables RADIUS accounting for this VAP (VSC).

mac authentication accounting radius profile

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

mac authentication accounting radius profile <name>

Sets RADIUS accounting to use the specified RADIUS profile.

no mac authentication accounting radius profile

Disables accounting support for MAC authentication.

mandatory authentication

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422

mandatory authentication

MAC-based authentication is mandatory.

2-60