CLI commands
LAN interface context
Path: View > Enable > Config > LAN interface
This context provides commands for configuring LAN.
end
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
end
Switches to parent context.
duplex
Supported on: MSM710 MSM730 MSM750 MSM760
duplex (auto half full)
Sets the duplex mode on LAN.
Parameters
auto | Lets the service controller automatically set duplex mode based on the |
| type of equipment it is connected to. |
half | Forces the port to operate in half duplex mode. |
full | Forces the port to operate in full duplex mode. |
speed
Supported on: MSM710 MSM730 MSM750 MSM760
speed (auto 10 100)
Sets the speed of LAN.
Parameters
auto | Lets the service controller automatically set port speed based on the type |
| of equipment it is connected to. |
100 | Forces the port to operate at 100 mbps. |
10 | Forces the port to operate at 10 mbps. |
interface vlan
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
interface vlan
Switches to the specified VLAN interface or create a new VLAN interface with the specified ID.
no interface vlan
Deletes the specified VLAN interface.
Parameters
<id> | VLAN ID. Range: 1 - 4094. |
<id2> | VLAN ID. When specified, is the last value in a range. |