CLI commands
ip nat
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ip nat
Enables Network Address Translation.
no ip nat
Disables Network Address Translation.
nat limit port range
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
nat limit port range
Reserves a range of TCP and UDP ports for each user starting at port 5000.
no nat limit port range
Use any port for NAT.
All outgoing traffic for the user is mapped within the range. Applications that set an incoming port (Active FTP, for example) may choose a port that is outside of the allocated port range. If you enable this feature you should not assign static NAT mappings in the range 5000 to 32768.
nat limit port range size
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
nat limit port range size <number>
Determine the size of the range to use per user, this will limit the number of user authentication supported if too high.
ip address dhcp
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
ip address dhcp
Specifies an ID to identify the service controller to a DHCP server. This parameter is not required by all ISPs.
no ip address dhcp
Deletes the specified DHCP client id.
end
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
end
Switches to parent context.
pppoe
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
pppoe
The service controller will automatically attempt to reconnect if the connection is lost.