CLI commands

dot1x reauth period

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

dot1x reauth period (15m 30m 1h 2h 4h 8h 12h)

Sets the 802.1X reauthentication interval. Client stations must reauthenticate when this interval expires.

dot1x reauth terminate

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

dot1x reauth terminate

Enable this option to allow client stations to remain connected during re-authentication. Client traffic is blocked only when re-authentication fails.

no dot1x reauth terminate

Disabled this option to block client traffic during re-authentication and only activate traffic again if authentication succeeds.

dot1x supplicant timeout

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

802.1x supplicant time-out <seconds>

Sets the 802.1X supplicant time-out.

Parameters

<seconds>

time-out in seconds.

inherit 8021x

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

inherit 802.1x

Inherit 802.1x settings from parent.

no inherit 802.1x

Do not inherit 802.1x settings from parent.

bridge protocol ieee

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

bridge protocol ieee

Enable the bridge spanning tree protocol to prevent undesirable loops from occurring in the network that may result in decreased throughput.

no bridge protocol ieee

Disable the bridge spanning tree protocol.

2-137