CLI commands
dot11 automatic
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dot11 automatic
Enables automatic transmit power selection.
no dot11 automatic
Disables automatic transmit power selection.
dot11 automatic
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
dot11 automatic
Sets the interval at which the transmit power setting is
antenna bidirectionnal
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
antenna bidirectionnal (diversity main auxiliary)
Sets the antenna to transmit and receive on. Select diversity to transmit and receive on both antennas.
Parameters
diversity | In this mode both antennas are used to transmit and receive. The service |
| controller supports both transmit and receive diversity. |
main | Transmit and receive on the main antenna only. |
aux | Transmit and receive on the aux antenna only. |
antenna gain
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
antenna gain <number>
Used only for Radar detection, records gain (in 5GHz band) of external antenna installed on device. Does not affect output power.
autochannel skip
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
autochannel skip <chan>
Adds the specified channel to the list of channels that are not allowed to be selected by the Auto Channel algorithm.
station distance
Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl
station distance (0km 5km 10km 15km 20km 25km 30km 35km)
Fine tunes internal timeout settings to account for the distance that wireless links span. For normal operation, the AP is optimized for links of less than 1 km.