HP MSM7XX About this guide, Products covered, HP ProCurve Product Naming

Introduction

About this guide

Note

About this guide

This guide explains how to work with the Command Line Interface (CLI) on HP ProCurve Networking MSM7xx Controllers.

Products covered

This guide covers the following products:

Model	Part
MSM710 Access Controller	J9328A
MSM710 Mobility Controller	J9325A
MSM730 Access Controller	J9329A
MSM730 Mobility Controller	J9326A
MSM750 Access Controller	J9330A
MSM750 Mobility Controller	J9327A
MSM760 Access Controller	J9420A
MSM760 Mobility Controller	J9421A
MSM765 Mobility Controller	J9370A

HP ProCurve Product Naming

As of October 1st, 2008, Colubris Networks was acquired by HP ProCurve. HP ProCurve has begun integrating the Colubris product line into the HP ProCurve Networking product portfolio (www.procurve.com/news/colubris-10-01-08.htm).

In the online help and this manual, Colubris product names have been changed to their equivalent HP ProCurve product names.

SOAP and SNMP MIBs retain the Colubris naming so you do not need to change your existing SOAP and MIB usage.

The Colubris Networks product names and their corresponding new HP ProCurve product names are as follows:

Colubris name	HP ProCurve name
MSC-5100 MultiService Controller	MSM710 Controller
MSC-5200 MultiService Controller	MSM730 Controller
MSC-5500 MultiService Controller	MSM750 Controller
MAP-320 MultiService Access Point	MSM310 Access Point

1-2