CLI commands

snmp-server trap syslog-severity

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server trap syslog-severity

Set the severity level of syslog messages that will trigger a trap.

no snmp-server trap syslog-severity

Do not send this trap.

snmp-server

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server

Enables the SNMP agent.

no snmp-server

Disables the SNMP agent.

snmp-server access port-1

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server access port-1

Enables SNMP access on the downstream port.

no snmp-server access port-1

Blocks SNMP access on the downstream port.

snmp-server allow

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server allow <ip address>/<mask>

Adds a host to the list of IP address from which access to the SNMP interface is permitted.

no snmp-server allow <ip address>/<mask>

Removes a host from the list of IP address from which access to the SNMP interface is permitted.

Parameters

<address>

IP address.

</mask>

Subnet mask in CIDR format. Specifies the number of bits in the mask.

snmp-server chassis-id

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server chassis-id <name>

Specifies a name to identify the service controller. By default, this is set to the serial number of the service controller.

no snmp-server chassis-id

Deletes the system name.

2-23