CLI commands

snmp-server contact

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server contact <email>

Specifies contact information.

no snmp-server contact

Deletes contact information.

Parameters

<email>

Email address.

snmp-server heartbeat period

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server heartbeat period <seconds>

Sets the interval between sending heartbeat traps.

Parameters

<seconds>

Heartbeat interval in seconds.

snmp-server location

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server location <name>

Specifies the location where the service controller is installed.

no snmp-server location

Deletes location information.

Parameters

<name>

Location where the service controller is installed.

snmp-server port

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server port <port number>

Sets the port the service controller will use to respond to SNMP requests.

Parameters

<port number> SNMP port number. Range 1 - 65535.

snmp-server readonly

Supported on: MSM710 MSM730 MSM750 MSM760 MSM765zl

snmp-server readonly <community>

Sets the read-only community string.

no snmp-server readonly

Deletes the read-only community string.

2-24