2. Installing Options

Available Options

This section describes how to install options.

By installing options, you can improve the printer performance and have an expanded variety of features to use. For the specifications of each option, see p.134 “Specifications”.

RCAUTION:

•Before installing options, the machine should be turned off and unplugged for at least an hour. Components inside the machine become very hot, and can cause a burn if touched.

•Before moving the machine, unplug the power cable from the outlet. If the cable is unplugged abruptly, it could become damaged. Damaged plugs or cables can cause an electrical or fire hazard.

•When lifting the machine, use the grips on both sides. The machine could break or cause an injury if dropped.

Important

❒The voltage rating of the connector for options is 24 V DC or less.
Option List
The following is a list of options for this printer.•Finisher SR 3040 *1•Paper Feed Unit PB 3020 *1•Large Capacity Tray RT45 *1•Bridge Unit Type 2045 *1•Punch Kit Type 1045 *1•Memory Unit Type D 128MB•Memory Unit Type E 256MB•User Account Enhance Unit Type E•IEEE 802.11b Interface Unit•IEEE 1284 Interface Board Type A•Gigabit Ethernet Board Type A•Printer Hard Disk Drive Type 8100•VM Card Type D•Data Storage Card Type A

*1 If you want to install the unit, contact your sales or service representative.

5