HP LP145N, MLP145, P7245 O Install the default or optional SDRAM modules into the slot, M Connect the blue end of the flat cable to the socket on the controller board

Attaching Printer Hard Disk Drive Type 8100

M Connect the blue end of the flat cable to the socket on the controller board.

2

AQV521S

When installing an SDRAM module on the controller board, do not store the controller board to the printer, and attach an SDRAM module.

N Remove the protective sheet when installing the hard disk drive is com- pleted.

AQV737S

Be sure to check whether the hard disk drive is completely secured before removing the sheet.

O Install the default or optional SDRAM modules into the slot.

For details about installing the SDRAM modules, see p.27 “Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module)”.

25