Ethernet Configuration

G Press the {Escape} key until the screen returns to the [Network Setup] menu.

H If you use IPv4, assign the IPv4 address to the printer. Select [IPv4 Settings] using {T} or {U}, and then press the {qEnter} key.

 

 

To get the IP address for the printer, contact your network administrator.

4

 

I To specify the IP Address, Select [IPv4 Address] using {T} or {U}, and then press the {qEnter} key.

If you use IPv4, assign also Subnet Mask and Gateway Address.

J Enter the address using {T} or {U}, and then press the {qEnter} key.

Press the {T}or {U}key to enter the left most entry field of the address. After entering the left field, press the {V}key, and then you can enter the next field. After completing to enter in the all fields, press the {q Enter} key. Use this method to assign Subnet Mask and Gateway Address.

• Do not set “011.022.033.044” as the IP address.

K Press the {Menu} key to return to the initial screen.L Print a configuration page to confirm the settings made.

Reference

For details about printing the configuration page, see “Printing the Test Page”, Quick Installation Guide.

53