Understanding the Functions

Command Settings

Reference

Name of Function

Page

Position

Page 35

In the case of MH-GL, GL2 (MH-RTL) and MH-GL/2 (MH-RTL), this specifies the initial pen position in printer commands.

•P1: The initial position is P1 (scaling point)

•LL: The initial position is at the lower left of the hardclip.

•Full: The initial position is at the lower left of the media.

Terminator

Page 36

In the case of MH-GL, GL2 (MH-RTL) and MH-GL/2 (MH-RTL), this specifies a function that is different from the original command function as the terminator with respect to some commands in each of the printer's command modes.

•Normal: Only the original command is used

•Special: Recognizes end of data as the terminator SP0; (SP;)

Resolution

Page 37

In the case of MH-GL, GL2 (MH-RTL) and MH-GL/2 (MH-RTL), this specifies the resolution for image data in MH-RTL com- mands.

•300 dpi: Sets image data resolution to 300 dpi

•360 dpi: Sets image data resolution to 360 dpi

•720 dpi: Sets image data resolution to 720 dpi

Online Timer

Page 38

When online data is broken off, this specifies a certain period of time, the elapsing of which is taken to be the end of image data.

•Online timeout: Off, 10 sec, 20 sec, 30 sec, 40 sec, 50 sec, 60 sec, 90 sec, 120 sec, 150 sec, 180 sec, 210 sec then in 30-sec increments to 720 sec, 750 sec, 780 sec, 800 sec.

Overwrite

Page 40

This specifies functions related to the printer's own environ- ment. Specifies the method for controlling the overwritten portions of a diagram.

•Last: Overwritten portion takes a color to be printed later

•Mix: Overwritten portion takes mixed colors

Functions of Explanation

RJ-6000 Series USER GUIDE Functions Edition

23