alert | up | 1 min | |
PACKAGE RECOVERY GROUP hpgroup10 |
| ||
PACKAGE |
| ROLE | STATUS |
PTST_sanfran/PACKAGE1 | primary | down | |
TST_dts1/PACKAGE1 |
| recovery | down |
PACKAGE RECOVERY GROUP hpgroup20 |
|
|
PACKAGE | ROLE | STATUS |
PTST_dts1/PACKAGE1x_ld | primary | down |
PTST_sanfran/PACKAGE1x_ld | recovery | down |
For a more comprehensive status of component clusters, nodes, and packages, use the cmviewclcommand on both clusters. On each cluster, make note of which nodes the primary packages are running on, as well as data sender and data receiver packages, if they are being used for logical data replication. Verify that the monitor is running on each cluster on which it is configured.
The following is an example of cmviewcl output for a cluster (nycluster) running a monitor package. Note that the recovery package salespkg_bak is not running, and is shown as an unowned package. This is the expected display while the other cluster is running salespkg.
CLUSTER | STATUS |
|
nycluster | up |
|
NODE | STATUS | STATE |
nynode1 | up | running |
Network Parameters: |
|
|
|
|
| ||
INTERFACE | STATUS | PATH | NAME |
| |||
PRIMARY |
| up |
|
| 12.1 |
| lan0 |
PRIMARY |
| up |
|
| 56.1 |
| lan2 |
NODE | STATUS | STATE: |
|
|
|
| |
nynode2 | up |
| running |
|
|
|
|
Network Parameters: |
|
|
|
|
| ||
INTERFACE | STATUS | PATH |
| NAME |
| ||
PRIMARY |
|
| up |
|
| 4.1 | lan0 |
PRIMARY |
|
| up |
|
| 56.1 | lan1 |
PACKAGE | STATUS | STATE | PKG_SWITCH | NODE | ||||
ccmonpkg | up |
| running | enabled | nynode2 | |||
Script_Parameters: |
|
|
|
|
|
|
| |
ITEM | NAME |
| STATUS | MAX_RESTARTS |
| RESTARTS | ||
Service | ccmonpkg.srv | up |
| 20 |
|
| 0 | |
Node_Switching_Parameters: |
|
|
|
|
|
| ||
NODE_TYPE | STATUS |
| SWITCHING | NAME |
|
|
|
|
Primary | up |
|
| enabled |
|
|
| nynode2 (current) |
Alternate | up |
|
| enabled |
|
| nynode1 | |
UNOWNED Packages: |
|
|
|
|
|
|
| |
PACKAGE | STATUS |
| STATE | PKG_SWITCH |
| NODE | ||
salespkg_bak down |
| unowned |
|
|
|
|
| |
Policy_Parameters: |
|
|
|
|
|
|
| |
POLICY_NAME | CONFIGURED_VALUE |
|
|
|
|
| ||
Failover | unknown |
|
|
|
|
|
|
|
Failback | unknown |
|
|
|
|
|
|
|
Script_Parameters:
110 Designing Continentalclusters