applications are running on the primary cluster may result in data corruption.

Are you sure that the primary packages are not running and will not come back, and are you certain that you want to start the recovery packages [y/n]? y

cmrecovercl: Attempting to recover Recovery Groups from cluster LACluster.

NOTE: The configuration file /etc/cmconcl/ccrac/ccrac.config for cluster shared storage recovery exists. Data storage specified in the file for this cluster will be prepared for this recovery process. If you choose "n" - not to prepare the storage for this recovery process, make sure that the required storage for this recovery process has been properly prepared. Is this what you intend to do [y/n]? y

The Oracle RAC instance package can be started in sequence.

#cmrecovercl -g <recoverygroupname>

Option -gis used to start up the first instance package, wait until the disk arrays are synchronized before starting up the second instance package.

If option -gis used with the command cmrecovercl, the following messages will be given instead:

WARNING: This command will take over for the primary cluster

primary_cluster by starting the recovery package on the recovery cluster secondary_cluster. You must follow your site disaster recovery procedure to ensure that the primary packages on primary_cluster are not running and that recovery on secondary_cluster is necessary. Continuing with this command while the applications are running on the primary cluster may result in data corruption.

Are you sure that the primary packages are not running and will not come back, and are you certain that you want to start the recovery packages [y/n]? y

cmrecovercl: Attempting to recover RecoveryGroup subsrecovery1 on cluster secondary_cluster

NOTE: The configuration file /etc/cmconcl/ccrac/ccrac.config for cluster shared storage recovery exists. If the primary package in the target group is configured within this file, the corresponding data storage will be prepared before starting the recovery package. If you choose "n" - not to prepare the storage for this recovery process, make sure that the required storage for the recovery package has been properly prepared.

Is this what you intend to do [y/n]? y

Enabling recovery package racp-cfs on recovery cluster secondary_cluster

Running package racp-cfs\

Running package racp-cfs on node atlanta

Successfully started package racp-cfs on node atlanta

Running package racp-cfs on node miami

Successfully started package racp-cfs on node miami

Successfully started package racp-cfs.

Support for Oracle RAC Instances in a Continentalclusters Environment 123