HP Serviceguard Continentalcluster manual 152

Table 15 Troubleshooting Continentalclusters Version A.08.00 (continued)

Command/Component	Symptoms	Cause	Resolution
cmcheckconcl	The following error message	The cause could be one of	• Set the AUTO_RUN flag
	is encountered while using	the following:	in the package
	the cmcheckconcl	• The AUTO_RUN flag in	configuration file to NO.
	command: Error: “Global	the package	• Ensure that the autorun
	package switching flag is set
		configuration file is set to	attribute is set to NO for
	to true for package
		YES.	recovery or rehearsal
	<PackageName> on cluster
		• The global switching for	packages. Disable the
	<ClusterName>”.
		the package is enabled	flag using the cmmodpkg
		using the cmmodpkg -e	–dcommand.
		<package_name>
		command. The value is
		set to YES.
cmclsentryd	The cmclsentryd daemon	Volume Group (VG) is not	Ensure that the Volume
	fails to start. The following	configured for the ccmonpkg	Group information for
	error message is logged in	package.	maintenance mode is
	the /var/adm/cmconcl/		configured properly for the
	logs/		ccmonpkg package. Verify
	cmclsentryd.log or		that the correct directory
	/var/ adm/cmcluster/		path is specified for the sate
	log/ ccmonpkg.log file:		directory attribute
	“State dir is not mounted”.		CONTINENTAL_CLUSTER_STATE_DIR
			configuration file.

cmrunpkg/cmmodpkg	The cmrunpkg command
	fails with the following error
	message:
	Error: Cannot start
	package
	<package_name>:Disallowed
	by the
	ContinentalClusters
	product
	or
	The cmmodpkg command
	fails with the following error
	message:
	Error: Cannot enable
	package
	<package_name>:Disallowed
	by the
	ContinentalClusters
	product

The Continentalclusters split brain prevention module (vpaccrlb) is not allowing the package to start.

Check the reason for the error in the log file /var/

adm/cmconcl/logs/ checkpkg.log and fix

accordingly.

152 Designing Continentalclusters