CLUSTER_TYPE="metrocluster"
RDF_MODE="sync"
3.Run the following command on dtsia14: $> /usr/sbin/cmdrprev
Following is the output that is displayed:
May 10 04:36:40 - Node dtsia14: Entering Data Replication Enabler
May 10 04:36:41 - Node dtsia14: Data Replication State: pkga
Role: R2
LocalRdfState: WD
RemoteRdfState: RW
RDF Mode: SYNC
RepState: SYNCHRONIZED
May 10 04:36:43 - Node dtsia14: Failover of the device group successfully. The package is allowed to start up.
May 10 04:36:43 - Node dtsia14: Leaving Data Replication Enabler
4.Verify that the cmdrprev command returns the value of 0.
The 0 value indicates that the data replication preparation will be successful in the event of a package failover from this node.
Sample Output of the cmdrprev Command 505