Step 1 To view the directory listings on the source client system, evfs2.hp.com, (where the keys
are originally located), enter the following command before the backup operation:
$ ll /etc/evfs/pkey/root
The following output is displayed:
total 32 |
|
|
|
|
|
|
|
|
1 | root | sys | 775 | Oct | 24 | 16:57 | root.priv | |
1 | root | sys | 424 | Oct | 24 | 16:57 | root.pub |
Step 2 To view the directory listings on the target client system, evfs6.hp.com (where the backup keys are restored), enter the following command after the backup and restore operation:
# ll /etc/evfs/pkey/root
The following output is displayed:
total 32 |
|
|
|
|
|
|
|
|
1 | root | sys | 775 | Oct | 24 | 16:57 | root.priv | |
1 | root | sys | 424 | Oct | 24 | 16:57 | root.pub |
If the directory listings before backup and after the subsequent backup and restore operations are the same, the backup and restore operations are successful.
Conclusion
HP has successfully tested the backup and restore of data on
Related Information
For more information on
For more information on
For more information on the HP OpenView Storage Data Protector software, see the HP Data Protector Software website at:
http://www.hp.com/go/dataprotector
For more information on HP OpenView Storage Data Protector, see the HP OpenView Storage Data Protector Online Help, which is available along with the Cell Manager GUI software.
57