Hunter Fan 43154 PROGRAMMING, 12 Hr. / 24 Hr. Time Format, Personal Program Schedule, Revising Programs, day/time, /return, program

5

Setting Day and Time (Continued)
STEP 2:
	■ Press again to change from hour setting to
day/time		M
	minute setting. The current minute will be
	flashing.	PM

■Press to change the Minute up or down to the current minute.

STEP 3:
day/time	■ Press again to change from minute setting	M
	to day setting. The current day will be flash-
	ing.	PM

■Press to change the Day up or down to the current day.

STEP 4:
day/time	■ Press again to change back to the			SA
	normal display.
or				PM
hold				2
/return				TEMP
		hold
NOTE: You may press			at any time during Day and Time setting to return to

/return

the normal display.

12 Hr. / 24 Hr. Time Format

Your thermostat is set from the factory in normal 12 (AM / PM) time format. To change to 24

hour (military) time, press program at any time while the Hour, Minute, or Day is flashing to

toggle between the 12 hour and 24 hour formats. The AM / PM indicator will not be displayed in 24 hour mode. Both the current time and all programs will automatically change to the selected format.

PROGRAMMING

The following time and temperature settings are pre-programmed into the thermostat:

		Temperature in C˚ (F˚)
Program Number	Time	Heat	Cool
1	6:00 am	68˚F (20˚C)	78˚F (26˚C)
2	8:00 am	60˚F (16˚C)	85˚F (29˚C)
3	4:00 pm	68˚F (20˚C)	78˚F (26˚C)
4	10:00 pm	60˚F (16˚C)	82˚F (28˚C)

■All 7 days of the week have the same default programs.

Personal Program Schedule

■You can revise the factory programs to match your own schedule. Use this Personal Program Schedule to determine which times and temperature settings match your comfort and energy saving requirements. Use a pencil so you can revise your records each time you change your program settings.

Heating

Day	Program 1	Program 2	Program 3	Program 4
Monday –	Time	Time	Time	Time
Friday	Temp	Temp	Temp	Temp
Saturday –	Time	Time	Time	Time
Sunday	Temp	Temp	Temp	Temp

Cooling

Day	Program 1	Program 2	Program 3	Program 4
Monday –	Time	Time	Time	Time
Friday	Temp	Temp	Temp	Temp
Saturday –	Time	Time	Time	Time
Sunday	Temp	Temp	Temp	Temp

Revising Programs

■Familiarize yourself with manually changing programs, so that you can easily modify the programs as your comfort needs change. Follow the steps below to change the program times and temperatures.

NOTE: 1) The program time can be set in 10-minute increments.

2)The program temperature can be set in increments of 1˚F (1˚C).

3)After 15 seconds without a key press, the thermostat will return to normal display mode.

4)When setting the program time, note the AM / PM indicator.

STEP 1:

system	■ Slide the System Switch to the HEAT or		SA
heat
	COOL position to program the correspond-
off
cool	ing system.		PM
	NOTE: If the System Switch is in the OFF		2
	position, the last position used will be		TEMP
	programmed.
STEP 2:
program	■ Press to enter program mode. HEAT or COOL
			M T W TH F
	will be displayed on the LCD.
			AM
		1
STEP 3:
			HEAT

■The Program hour and AM or PM indicator are flashing. Press to change the hour.

STEP 4:
	■ Press again to change to the minute posi-
program		M T W TH F
	tion. The current minute will be flashing.	AM
	■ Press to change the minute.
		1
		HEAT
STEP 5:
program	■ Press again to change to the program tem-
		M T W TH F
	perature. The current temperature will be
		AM
	flashing.
	■ Press to change the temperature.	1
		HEAT
STEP 6:
program	■ Press again to move to the next program number.
	■ Repeat Steps 3 through 5 to change the remaining Weekday and
	Weekend programs. (There are a total of 8 programs.)
program	■ After cycling through all 8 programs, press again to return the
	display to normal.
hold	■ Press at any time to exit the Program Mode.

/return