Hunter Fan Ceiling Fan Light Kits manual

1. Unassemble the fan switch housing as shown in Figure 1.

2. Disconnect the upper and lower plug connectors between the upper switch housing and lower

switch housing.

Note: Do not discard any parts. You will need to replace it if you remove the light fixture in the

future.

Upper Switch Housing

Switch

Housing

Assembly

Screws

Lower Switch

Housing

Switch

Housing Cover Plate

Plug Button

Switch Housing

Assembly Screws

Figure 1 - Unassembling the fan switch housing 41558-013-6-2003

Installation Instructions

For Hunter Ceiling Fan Light Kits

Aurora Style

Preparing for Installation

CAUTIONS

· Read entire text carefully before beginning installation and save these instructions.

· To reduce the risk of electrical shock, install this light kit only on listed Hunter ceiling fans type A through Z.

WARNINGS

· To avoid possible electrical shock, before installing light fixtures, disconnect power by turning off the circuit breakers both to the outlet box and to its associated wall switch location. If you cannot lock the circuit breakers in theoff position, securely fasten a prominent warning device, such as a tag, to the service panel.

· Connect house wiring to the fan before attaching the light fixture to the fan.

· All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, you should use a qualified electrician. Professional installation is recommended.