Manuals / Husqvarna / Power Tools / Grinder

Husqvarna PG530 manuel dutilisation Introduction, Transportation, Storage

Models: PG530

1 26
Download 26 pages 62.23 Kb
Page 5
Image 5

Introduction

Introduction

The Husqvarna PG 530 floor surfacing machines are designed for wet or dry grinding of marble, terrazzo, granite and concrete. Their applications range from rough grinding through to a polished finish.

This manual covers the Husqvarna PG 530 series of floor grinders equipped with twin motor drive here after referred to as Dual Drive Technology™.

It is extremely important all users be familiar with the contents of this manual before commencing operation of either machine. Failure to do so may result in dam- age to machinery or expose operator to unnecessary dangers.

IMPORTANT!

Only staff that have received the necessary education, both practically and theoretically concerning their usage should operate the machinery.

Transportation

The machine comes equipped with inbuilt advanced electronic systems called variable speed drives or frequency converters. These drives enable the variable speed and direction component of each of the motors. The drives are located in the steel cabinet mounted on the machine chassis.

As with all electronic equipment, the drives are sensi- tive to excessive vibration, rough treatment and high levels of dust. Much care and attention has been given by the manufacturer to ensure maximal protection is given to the drives. Note the shock absorbing mounting system used to mount the steel cabinet on the machine chassis/ frame.

When transporting, it is important to ensure the ma- chinery is properly secured at all times to eliminate “bouncing” of the variable speed drives. Ensure the chassis or frame section of the machine is secured down at all times when in transit.

The machine should always be transported under cover limiting the exposed to natural elements – in particular rain and snow.

IMPORTANT!

The machine should not be lifted by handle, motor, chassis or other parts. Transportation of the machine is best done on a pallet/skid to which the machine must be firmly secured. Do not attempt to slide the tines/forks from a fork lift under grinding heads unless on a pallet/skid. Failure to do so can cause irrepa- rable damage to grinding heads of machine and internal parts.

It is recommended that machinery be transported with a set of diamonds attached at all times to ensure pro- tection of locking mechanism for diamond plates.

Storage

The machine should always be stored in a dry place when not in use.

6- English

Page 4 Page 6
Page 5
Image 5
Husqvarna PG530 manuel dutilisation Introduction, Transportation, Storage
Page 4 Page 6

PG530 specifications

The Husqvarna PG530 is a powerful and versatile floor grinding machine designed for professional contractors and heavy-duty applications. This equipment is ideal for preparing and finishing various types of surfaces, including concrete, terrazzo, and natural stone. Built with advanced technologies and rugged construction, the PG530 stands out in the market for its reliability and performance.

One of the key features of the Husqvarna PG530 is its unique three-disc design, which provides efficient grinding performance. The three grinding heads allow for better distribution of weight and improved balance, ensuring an even grind across the floor. With a wide grinding width of 21 inches, the PG530 can cover large surface areas quickly, making it an efficient choice for both small projects and larger commercial jobs.

The machine is powered by a robust 15 HP motor, delivering ample power to tackle tough grinding tasks. It also features adjustable grinding pressure, allowing users to optimize the pressure according to the specific requirements of the job. This adaptability makes the PG530 suitable for a wide range of applications, from light surface preparation to heavy-duty grinding and polishing.

Additionally, the PG530 is equipped with Husqvarna's patented Dual Drive Technology. This innovative system provides independent speed control for both the grinding heads and the machine's forward movement. This capability allows operators to adjust the speed of the grinding discs while controlling the speed of the machine itself, resulting in enhanced flexibility and control during operation.

The machine is designed with user comfort in mind. Its ergonomic handle and adjustable working height make it easy to operate for extended periods without causing fatigue. The PG530 is also fitted with an integrated dust collection system, helping to maintain a clean working environment by minimizing dust and debris. This feature is essential for safety and compliance with health regulations.

In terms of usability, the PG530 is easy to transport and set up, making it a practical choice for contractors on the go. Its compact footprint ensures that it can maneuver in tight spaces, while the folding handle allows for easy storage.

Overall, the Husqvarna PG530 combines powerful performance, innovative technology, and user-friendly design to meet the demands of flooring professionals. Whether for surface preparation, grinding, or polishing, the PG530 is a reliable tool that enhances productivity and delivers superior results.