3.When the Setup Utility prompt appears on the screen during
4.Follow the instructions on the screen.
5.When finished, select System Summary to verify that any configuration changes have been accepted.
Product Recovery Program menu
Type 2271/6840/6841 machines have recovery and diagnostics programs on a separate hard drive partition. The Diagnostics diskette is not shipped with the machine or the HMM. To download the diagnostics program, see “Diagnostics download” on page 8.
At startup, after the machine tests the SIMM/DIMM memory (if
Test is set to Enhanced), the machine displays the following prompt:
To start the Product Recovery Program, press F11
After depressing F11, you are given the following options.
vFull recovery
This utility reformats the hard drive and restores all original files.
vPartial recovery
This utility reformats the hard drive and restores the Windows operating system and all device drivers
vRepair
This is the emergency repair utility, and should not be used to install Windows components.
vSystem utilities
1.Run diagnostics
2.System info
3.Create recovery/ repair diskette
Diagnostics
The diagnostic programs use a full range of diagnostic utilities to determine the operating condition of the computer’s hardware components.
For a complete list of error codes and messages, see
Diagnostics download
To download the diagnostic programs, do the following:
vGo to http://www.ibm.com/.
vSelect Support.
vSelect Desktop computing from the ″Search by Category″
vSelect NetVista from the ″Product Family″ list.
vSearch for the machine type in the ″Quick Path″ box on the left.
vSelect Diagnostics from the ″Downloadable files by Category″
″Downloadable files by date″ list. This link will take you to the
8Hardware Maintenance Manual A40 Type 6840 A40P Type 6841 A40i Type 2271: IBM NetVista Computer