IBM A40P TYPE 6841, A40I TYPE 2271, A40 TYPE 6840 manual

Diagnostic Error Code	FRU/Action
000-197-XXX	1.	Make sure the component that is called
BIOS test warning
		out is connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning
		statement
	4.	Component under test
000-198-XXX	1.	If a component is called out, make sure
BIOS test aborted
		it is connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″
		section
000-199-XXX	1.	Go to the ″Undetermined problems″
BIOS test failed, cause unknown
		section
	2.	Flash the system and re-test
	3.	Replace component under function test
000-250-XXX	1.	Flash the system
BIOS APM failure
	2.	System board
000-270-XXX	1.	Flash the system
BIOS ACPI failure
	2.	System board
001-000-XXX	1.	No action
System Test Passed
001-00X-XXX	1.	System board
System Error
001-01X-XXX	1.	System board
System Error
001-024-XXX	1.	System board
System Addressing test failure
001-025-XXX	1.	Flash the system
System Checksum Value error
	2.	System board
001-026-XXX	1.	Flash the system
System FLASH data error
	2.	System board
001-027-XXX	1.	Run Setup
System Configuration/Setup error
	2.	Flash the system
	3.	System board
001-032-XXX	1.	System board
System Device Controller failure
001-034-XXX	1.	Reboot the system
System Device Buffer Allocation failure
	2.	Flash the system
	3.	Run memory test
	4.	System board
001-035-XXX	1.	System board
System Device Reset condition detected
001-036-XXX	1.	System board
System Register error

40Hardware Maintenance Manual A40 Type 6840 A40P Type 6841 A40i Type 2271: IBM NetVista Computer