IBM A40 TYPE 6840, A40I TYPE 2271, A40P TYPE 6841 manual

Diagnostic Error Code	FRU/Action
005-197-XXX	1.	Make sure the component that is called
Video test warning
		out is connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning
		statement
	4.	Component under test
005-198-XXX	1.	If a component is called out, make sure
Video test aborted
		it is connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″
		section
005-199-XXX	1.	Go to the ″Undetermined problems″
Video test failed, cause unknown
		section
	2.	Flash the system and re-test
	3.	Replace component under function test
005-2XX-XXX	1.	Video card, if installed
005-3XX-XXX
	2.	System board
Video subsystem error
006-000-XXX	1.	No action
Diskette interface Test Passed
006-0XX-XXX	1.	Diskette drive Cable
Diskette interface error
	2.	Diskette drive
	3.	System board
006-195-XXX	1.	Information
Diskette interface Test aborted by user
	2.	Re-start the test, if necessary
006-196-XXX	1.	Press F3 to review the log file
Diskette interface test halt, error threshold
	2.	Re-start the test to reset the log file
exceeded
006-197-XXX	1.	If a component is called out, make sure
Diskette interface test warning
		it is connected and/or enabled
	2.	Re-run test
	3.	Component that is called out in warning
		statement
	4.	Component under test
006-198-XXX	1.	If a component is called out, make sure
Diskette interface test aborted
		it is connected and/or enabled
	2.	Flash the system and re-test
	3.	Go to the ″Undetermined problems″
		section
006-199-XXX	1.	Go to the ″Undetermined problems″
Diskette interface test failed, cause unknown
		section
	2.	Flash the system and re-test
	3.	Replace component under function test
006-25X-XXX	1.	Diskette drive cable
Diskette interface Error
	2.	Diskette drive
	3.	System board

44Hardware Maintenance Manual A40 Type 6840 A40P Type 6841 A40i Type 2271: IBM NetVista Computer