IBM A40P TYPE 6841, A40I TYPE 2271, A40 TYPE 6840 manual

POST Error Code	FRU/Action
1102	1.	Run diagnostics
Card selected feedback error
1103	1.	Run diagnostics
Port fails register check
	2.	System Board
1106	1.	Run diagnostics
Serial option cannot be turned off
	2.	System Board
1107	1.	Serial Device Cable
	2.	System Board
1110	1.	Run diagnostics
Register test failed
	2.	System Board
1116	1.	Run diagnostics
Interrupt error
1117	1.	Run diagnostics
Failed baud rate test
1162	1.	Run Configuration
Serial port configuration error
	2.	Serial Adapter
		(if installed)
	3.	System Board
11XX	1.	System Board
Not listed above
1201	1.	System Board
	2.	Any Serial Device
1202, 1206, 1208, 1209, 12XX	1.	Dual Async Adapter/A
	2.	System Board
	3.	Any Serial Device
1207	1.	Communications Cable
	2.	Dual Async Adapter/A
13XX	1.	Game Adapter
1402	Information only
Printer not ready
1403	Information only
No paper error, or interrupt failure
1404	1.	Run diagnostics
System board timeout failure
1405	1.	Run diagnostics
Parallel adapter error
1406	1.	Run diagnostics
Presence test error
14XX	1.	Printer
Not listed above. Check printer before
	2.	System Board
replacing system board
15XX	1.	SDLC Adapter
1692	1.	Run FDISK to ensure at least one active
Boot sequence error
		partition is set active

64Hardware Maintenance Manual A40 Type 6840 A40P Type 6841 A40i Type 2271: IBM NetVista Computer