12
Customizing Your Monitor

Locking the controls

You can protect adjustment data by locking the controls.
1Press the button.
The MENU OSD appears.
2Press the ./> buttons to select “ OPTION,” and
press the button again.
The OPTION OSD appears.
3Press the ./> buttons to select “ (CONTROL
LOCK).”
4Press the / button to select “ON.”
Press the button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
Only the u (power) switch, EXIT, and “ (CONTROL
LOCK)” of the “ OPTION” OSD will operate. If any other
items are selected, the mark appears on the screen.

To cancel the control lock

Repeat steps 1 through 3 above and press the / button to
select “OFF.”
DEGAUSS
ON
OPT I ON
CONTROL
LOCK
OFF ON
OPT I ON
Using the HELP On-screen
Display
The HELP OSD contains helpful hints and information
about this monitor. If your monitor is displaying symptoms
that match those listed in the HELP OSD, follow the on-
screen instructions to resolve the problem. If the symptoms
do not match those listed in the HELP OSD or if the
problem persists, see “Troubleshooting” on page 16.
1Press the button.
The MENU OSD appears.
2Press the ./> buttons to select “ HELP” and press
the button again.
The HELP OSD appears.
3Press the ./> buttons to select a HELP menu item
and press the button again.
Instructions or information to resolve the problem
appears on the screen. An explanation of each menu
item is given below.
RECOMMENDED RESOLUTION
If the picture does not fill the screen to the edges or if the
picture appears too large for the screen, adjust the
resolution to the figures shown in the OSD using your
computer. If the input signal matches one of this monitor’s
factory preset modes, the resolution and refresh rate of the
current input signal are displayed.
FLICKER
If the picture is flickering, adjust the refresh rate to figures
shown in the OSD. If the input signal matches one of this
monitor’s factory preset modes, the refresh rate of the
current input signal is displayed.
THIN HORIZONTAL LINE
The lines that appear on your screen are damper wires. See
page 13 for more information about the damper wires.
RETURN TO MAIN MENU
RECOMMENDED RESOLUT ION
FLICKER
THI N HORI Z ONTA L LI NE
DISTORTED SHAPE
OUT OF FOCU S
DI SCOLORAT I ON
HELP