®
Copyright and Disclaimer
© Copyright International Business Machines Corporation 2002
All Rights Reserved
Printed in the United States of America September 2002
The following are trademarks ofInternational Business Machines Corporation in the United States, or other countries, or
both.
IBM IBM Logo
CoreConnect
PowerPC PowerPC logo
PowerPC Architecture
RISCTrace RISCWatch
Other company, product, and service names may be trademarks or service marks of others.
All information contained in this document is subject to change without notice. The products described in this document
are NOT intended for use in implantation, life support, space, nuclear, or military applications, or other hazardous uses
wheremalfunction could result in death, bodily injury, or catastrophic property damage. The information contained in this
document does not affect or change IBM product specifications or warranties. Nothing in this document shall operate as
an express or implied license or indemnity under the intellectual property rights of IBM or third parties. All information
contained in this document was obtained in specific environments, and is presented as an illustration. The results
obtained in other operating environments may vary.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. In no event will IBM be
liable for damages arising directly or indirectly from any use of the information contained in this document.
IBM Microelectronics Division
1580 Route 52, Bldg. 504
Hopewell Junction, NY 12533-6351
The IBM home page can be found at http://www.ibm.com
The IBM Microelectronics Division home page can be found at http://www.ibm.com/chips
title.fm.
September 12, 2002
Note: This document contains information on products in the sampling and/or initial production phases of
development. This information is subject to change without notice. Verify with your IBM field applications
engineer that you have the latest version of this document before finalizing a design.
W
hile the information contained herein is believed to be accurate, such information is preliminary, and should not be
r
elied upon for accuracy or completeness, and no representations or warranties of accuracy or completeness are made
.