b.Type QSECOFR on the System Service Tool Sign on display and press Enter.

c.Select Start a service tool option. Press the Enter key.

d.On the Start a Service Tool display, select Hardware service manager. Press the Enter key.

e.From the Hardware Service Manager display, press F6 (print configuration).

f.To return to the AS/400 Main menu, press F3 (Exit) twice. Then, press the Enter key.

g.Keep the list for future reference.

__ 7. For LPAR systems:

No LPAR

LPAR Primary Partition

LPAR Secondary Partition

 

 

 

No action Required, skip to

Go to the Information Center

After the primary is

the next numbered step.

(CD-ROM or online) and

configured properly, follow

 

follow the procedures on

the steps to recover the

 

how to restore an LPAR

secondary partition

 

system after an upgrade.

configurations. After

 

 

recovering the original

 

 

secondary partitions, more

 

 

secondary partitions may be

 

 

added.

 

 

 

__ 8. If you receive the disk unit format warning screen during the first IPL (IPL started at step 2 on page 25), then the disk unit format might need to be optimized. For more information, see the manual Backup and Recovery, SC41-5304-05. A PDF version of this manual is available from the Information Center under Systems Management -> Backup, recovery, and availability -> Manuals and Redbooks.

__ 9. Resume normal operations and verify that all your applications run properly. IBM recommends that you tune the system performance. There are billable services available that can do this for you. You can find information about performance tuning in the Work Management manual. A PDF version of this manual is available from the iSeries Information Center under

Systems Management -> Work management-> Work Management Manuals.

30iSeries 940x RISC-to-RISC Road Map V5R1

Page 42
Image 42
IBM SA41-5155-05 manual Systems Management Work management- Work Management Manuals