This soft copy for use by IBM employees only.

interfaceIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

The interface number of the port represented by this entry. This is the same number as the index used to represent this

interface in the MIB-II interface table.″ ::= { interfaceEntry 1 }

interfaceSlot OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory

DESCRIPTION

″The slot number of this ATM port′ s module.″ ::= { interfaceEntry 2 }

interfacePort OBJECT-TYPE SYNTAX INTEGER (1..64) ACCESS read-only STATUS mandatory

DESCRIPTION

″The port number of this ATM port.″ ::= { interfaceEntry 3 }

interfaceConnector OBJECT-TYPE SYNTAX INTEGER {

unknown (1), internal (2), mic (3), sc-Duplex (4), monomode (5), db-9 (6), rj45 (7), bnc (8), db-15 (9)

}

ACCESS read-only STATUS mandatory

DESCRIPTION

Whether this port is an internal port (on the backplane) or an external connector.″

::= { interfaceEntry 4 }

interfaceAdminState OBJECT-TYPE SYNTAX INTEGER {

enabled (1), disabled (2), wrap-reply (3), wrap-far-end (4)

}

ACCESS read-write STATUS mandatory

DESCRIPTION

The administrative state for this port.

When set to disabled, no ATM traffic can pass on this port; all connections (SVC and PVC) are cleared.

When set to wrap-reply, this interface is wrapped so that

208ATM Workgroup Solutions: Implementing the 8285 ATM Switch

Page 224
Image 224
IBM SG24-4817-00 manual Description