Icom FP-561 - page 2

Qty.

qSelf-tapping screws (M 6 ×30)········································4

wSpring washers (M 6)······················································4

eFlat washers (M 6)···························································4

rConnector covers·····························································2

tHorse band (HAS-40)······················································2

yExtention pipe (2273 PIPE)·············································1

uGPS antenna···································································1

iPower cable (OPC-786)···················································1

INTRODUCTION

Thank you very much for purchasing the FP-561.

The FP-561 is an advanced navigation and ﬁshﬁnd-

ing system of compact design into which a marine

navigator with a built-in GPS receiver and a

ﬁshﬁnder are integrated.

Connecting the PD-200, a DGPS beacon receiver,

to this system will permit the GPS to pinpoint the

ship location more accurately.

Please read this instruction manual carefully to en-

sure correct and efﬁcient use of the product.

SUPPLIED ACCESSORIES

●Instruction manual

Cartgraphy supplied by

NAVIONICS Seamless chart start from

$99 and span the globe with high

detail and 16 zoom levels.

Ask your nearest NAVIONICS dealer

for more details.

Versions of the FP-561 which display “CE” on the serial

number seal, comply with the essential requirements of

the 89/336/EEC directive for Electromagnetic Compati-

bility.