69
6INSTALLATION PROCEDURE
186 mm; 76⁄16″37.5 mm;115⁄32″
103 mm;4″
125.65 mm;415⁄16″
196 mm; 723⁄32″125 mm;429⁄32″
203 mm;8″
75 mm;31⁄32″
234.5 mm;97⁄32″
178 mm;7″
234.5 mm;97⁄32″
160 mm;65⁄16″
91 mm;319⁄32″
Tilting lever
Tilting Removing the unit from the stand
The stand can also be attached to the top of the unit.
*Protrusions not included
MARINEPLOTTER/SOUNDER
fp-561
COMBINE
MARINEPLOTTER/SOUNDER
fp-561
COMBINE
ıInstalling the main unit Install the main unit as follows.
qChoose the installation position of the stand of the main unit.
wMark center points through the four mounting holes of the stand and then drill a
hole of 5 mm in diameter at each of the marked points.
eSecure the stand with the self-tapping screws, flat washers and spring washers.
rMount the main unit onto the stand and secure it with two mounting screws.
tPush the tilting lever down and adjust the angle of the unit as appropriate; then
return the lever to the original position.