12 COMMANDMIC II™ HM-157

■Installation

The optional HM-157 can be connected to the transceiver di- rectly, as well as via the supplied connection cable for longer distance remote operation. The connector of the connection cable can be installed into a cabinet, wall, etc., as a built-in plug.

For longer distance remote operation, the optional extension cable, OPC-999 (6 m; 20 ft/connecting between transceiver and the connection cable), is available, and up to 2 OPC-999 can be added.

qInsert the supplied cable into the external microphone jack and tighten the cable nut as shown below.

wTo use the supplied cable as a wall socket, follow the below steps.

eUsing the mounting base, carefully mark off the 2 spots where the cable and screws will be fastened.

rDrill holes at these marks.

tInstall the mounting base using the supplied screws as shown below.

Mounting base

Nut

Gasket

 

Screw holes

 

(approx. 2 (d) mm; 3 32″)

Cap

yThe completed installation should look like this.

52