Icom IC-U82, IC-V82

15 SPECIFICATIONS

GENERAL

•Frequency coverage : (unit: MHz)

USA Tx: 420–450*1/Rx: 400–479*1

Europe, Korea Tx/Rx: 430–440

General (LM), China (LM) Tx/Rx: 400–479*2

*1Guaranteed: 440–450MHz range only.

*2Guaranteed: 430–440MHz range only.

•Type of emission :FM

•Number of memory channels : 207 (incl. 6 scan edges and 1 call)

•Frequency resolution : 5, 10, 12.5, 15, 20, 25, 30, 50 kHz

•Operating temperature range : –10°C to +60°C; +14˚F to +140˚F

•Frequency stability : ±2.5 ppm (–10°C to +60°C)

•Power supply requirement :7.2 V DC (6–10.3 V DC acceptable;

Icom’s battery pack only)

•Current drain (at 7.2 V DC: approx.):

Transmit at 5W (High) 2.0 A

at 2 W (Middle) 1.4 A

at 0.5 W (Low) 0.9 A

Receive standby 80 mA

power save 30 mA

max. audio 250 mA

•Antenna connector : BNC (50 Ω)

•Dimensions (proj. not included) :54(W) ×139(H) ×36.7(D) mm

21⁄8(W)×515⁄32(H)×17⁄16(D) in

•Weight (approx.) : 390 g; 13.8 oz

(with BP-222N and Ant.)

200 g; 7.1 oz

(without battery pack and Ant.)

•Ext. data connector : 3-conductor 2.5 (d) mm (1⁄10″)

TRANSMITTER

•Modulation system : Variable reactance frequency mod.

•Output power (at 7.2 V) : 5 W/2 W/0.5 W (High/Mid/Low)

•Max. frequency deviation : ±5.0 kHz [Wide]/±2.5 kHz [Narrow]

•Spurious emissions : Less than –60 dBc

•Microphone connector :

3-conductor 2.5 (d) mm (

⁄

″)/2.2 kΩ

RECEIVER

•Receive system :Double-conversion superheterodyne

•Intermediate frequencies : 1st: 46.35 MHz, 2nd: 450 kHz

•Sensitivity (at 12 dB SINAD) :0.16µV typical

•Squelch sensitivity (threshold) :0.11µV typical

•Selectivity :

[Wide] More than 55 dB

[Narrow] More than 50dB

•Spurious and image rejection: 70 dB typical

•Intermodulation : 65 dB typical

•

Audio output power

:More than 0.3 W at 10% distortion with

(at 7.2 V DC)

an 8 Ωload

•Ext. speaker connector : 3-conductor 3.5 (d) mm (1⁄8″)/8 Ω

All stated speciﬁcations are subject to change without notice or obligation.

■IC-U82